Digital Receiver FTA Digital Receiver FTA Built-in positioner
Digital Receiver FTA Digital Receiver FTA Digital Receiver with 2 CI + 1 Slot embedded Digital Receiver with 2 CI + 1 Slot embedded Built-in positioner Digital Terrestrial Receiver FTA

ESR-T200

Digital Terrestrial MHP Interactive Receiver

Digital Terrestrial Set Top Box

 

TECHNICAL SPECIFICATIONS:

  • TUNER
Frequency range 50 ~ 860 MHz
Input impedance 75 Ohm
Signal Level -75 dBm~-20 dBm
Connector IEC 169-2 type
RF Bandwidth 8 MHz (UHF), 7 MHz (VHF)
  • Demodulation
Standard DVB-T ; EN300 744
Waveform COFDM (QPSK, 16QAM, 64QAM)
Transmission mode 2k FFT, 8k FFT
Constellations QPSK, 16QAM,64 QAM
Guard intervals 1/4, 1/8, 1/16, 1/32
FEC modes 1/2, 2/3, 3/4, 5/6, 7/8
  • Video
Standard CD ISO/IEC 13818-2, MPEG-2 MP@ML
Video aspect ratio 4:3, 16:9
Video system PAL and NTSC
  • Audio
Standard ISO/IEC 11172-3
Audio decoder MPEG-1/2 Layer I and II, MUSICAM
Audio channel Mono, Dual-channel, Joint Stereo, Stereo for digital
Sampling rate 32/ 44,1 / 48 KHz
Volume control 18 Levels adjustment
  • Connector
Digital audio output 1 x optical S/PDIF
Analog audio output 2 X RCA
Video output (TV SCART) + 1x RCA
Return channel Single RJ 11 ( modem V.92 56 Kbps)
  • General Data
Dimmensions 265 x 43 x 170 mm.
Weight About 1 Kg.
Number of smart card readers 1
Power supply AC 100 ~ 240V ,50~60Hz
Flash Memory 8 MBytes
RAM 16 MBytes (video) + 32 Mbytes (System)
Chipset

STi5517

 

Main Page

Back