Digital Receiver FTA Digital Receiver FTA Built-in positioner
Digital Receiver FTA Digital Receiver FTA Digital Receiver with 2 CI + 1 Slot embedded Digital Receiver with 2 CI + 1 Slot embedded Built-in positioner Digital Terrestrial Receiver FTA

ESR-D104

Digital Receiver FTA

Digital Satellite Set Top Box

 

TECHNICAL SPECIFICATIONS:

  • TUNER
Satellite IF Input 950 ~ 2,150 MHz
Input impedance 75 Ohm
Signal Level -65 dBm~-25 dBm
Connector F type, Female, Loop Through
LNB power supply 13/18V/OFF, MAX.400mA
Band switch 22KHz Tone
DiSEqC DiSEqC 1.2 , DiSEqC 1.0 compatible
  • Demodulation
Standard DVB-S EN300 421
Waveform QPSK
Symbol rate 2~45Mbps
Roll off factor 0.35
Reed Solomon decoder (204, 108 ) T=8
Code rate 1/2, 2/3, 3/4, 5/6, 7/8
  • Video
Standard CD ISO/IEC 13818-2, MPEG-2 MP@ML
Video aspect ratio 4:3, 16:9
Video system PAL and NTSC
  • Audio
Standard ISO/IEC 11172-3
Audio decoder MPEG Layer I and II, MUSICAM
Audio channel Mono, Dual-channel, Joint Stereo, Stereo
Sampling rate 32/ 44,1 / 48 KHz
Volume control 18 Levels adjustment
  • Connector
Digital audio output 1 x optical S/PDIF
Analog audio output 2 X RCA
Scart terminal 2 (TV & VCR)
Serial port RS-232(9-pin D-sub) max.115,2 Mbps
  • General Data
Dimmensions 258 x 42 x 155 mm.
Weight About 1 Kg.
Operating Temp. 0º ~ 45º C
Power supply AC 90 ~ 240V ,50~60Hz

 

Main Page

Back