Digital Receiver FTA Digital Receiver FTA Built-in positioner
Digital Receiver FTA Digital Receiver FTA Digital Receiver with 2 CI + 1 Slot embedded Digital Receiver with 2 CI + 1 Slot embedded Built-in positioner Digital Terrestrial Receiver FTA

e-nano

Digital Terrestrial SCART Receiver

TECHNICAL SPECIFICATIONS:

  • TUNER
Frequency range 50 ~ 860 MHz
Input impedance 75 Ohm
Signal Level 64QAM:-78.5dBm~ -8.75dBm;16QAM:-84.1dBm~-8.75dBm;QPSK:-90.3dBm~ -8.75dBm
Connector IEC 169-2 type
RF Bandwidth 8 MHz (UHF), 7 MHz (VHF)

Demodulation

Standard DVB-T ; EN300 744
Waveform COFDM
Transmission mode 2k FFT, 8k FFT
Constellations QPSK, 16QAM,64 QAM
Guard intervals 1/4, 1/8, 1/16, 1/32
FEC modes 1/2, 2/3, 3/4, 5/6, 7/8
  • Video
Standard CD ISO/IEC 13818-2, MPEG-2 MP@ML
Video aspect ratio 4:3, 16:9
Video system PAL and NTSC
  • Audio
Standard ISO/IEC 11172-3
Audio decoder MPEG-1/2 Layer I and II, MUSICAM
Audio channel Left, Right, Stereo, Mono
Sampling rate 32/ 44,1 / 48 KHz
  • Connector
ANT IN
IEC 169-2,Female
RCA
1 AUDIO LEFT& 1 AUDIO RIGHT with JACK
TV SCART
21 PIN Male, CVBS, RGB, Audio L/R
RS232
1 connector 3.5mm JACK
  • General Data
Dimmensions
W:22.5cm D:24.5cm H:55cm
Humidity < 95%
Operating Temp. 0º ~ 40º C
Power supply AC/DC adaptor 90 ~ 240V AC,50~60Hz input - DC output 5 volts DC
Power consumption 3 W. max

 

Main Page

Back